Laboratory Roll-to-Roll UV Photoresist Coating Machine - Innate

Laboratory Roll-to-Roll UV Photoresist Coating Machine - Innate

Send Inquiry
Description

Introduction

 

This laboratory roll-to-roll UV photoresist coating machine is designed for continuous coating trials, substrate evaluation, and UV curing process development. It features a doctor blade coating head, a locally enclosed coating section with nitrogen inerting, and an integrated UV curing system.

 

Products Specification

 

Coating type

blade coating

Guide roller width

450mm

substrate width

400mm

Coating width

350mm

mechanical speed

0.1-5m/min

Coating speed

Coating speed: Adjustable within the machine's operating range, subject to the required UV curing conditions.

Coating thickness

Continuous coating single-sided thickness: Coating thickness is CNC adjustableThickness accuracy : ≤±5μm

Equipment size

L 6000 mm × W 960 mm × H 1700 mm (actual dimensions may vary)

The UV Wavelength, Oven Configuration, and Unwinding/Rewinding System are Customizable.

 

Main Equipment Configuration

 

• 1 × Doctor blade coating head​

• 2 × Unwinding units​

• 3 × Web guiding systems (automatic web alignment)​

• 2 × Corona treatment units​

• 1 × Laminating unit​

• 1 × 1 m heating oven​

• 1 × Air-knife cooling unit​

• 1 × UV curing lamp​

• 2 × Web pulling units​

• 1 × Rewinding unit​

• 1 × Web accumulator downstream of Unwinding Unit 1​

• 1 × Locally enclosed coating section with nitrogen inerting system

 

Solution

 

The system features two independent unwinding units to accommodate a wide range of substrate materials and experimental requirements:

- Unwinding Unit 1: Equipped with a web accumulator downstream of the unwinding section to accommodate delicate, low-strength substrates that require low web tension during processing.

- Unwinding Unit 2: Equipped with a corona treatment unit downstream of the unwinding section, suitable for release paper, release films, and other substrates requiring surface treatment to improve coating adhesion.

The dual-unwinding configuration provides greater flexibility for laboratory trials involving different substrate materials and surface characteristics.

The coating section is locally enclosed and equipped with nitrogen inerting to control the atmosphere around the coating area. The suitability of this system for flammable formulations depends on the process conditions and the required safety measures. The system is equipped with two corona treatment units, one downstream of Unwinding Unit 2 and the other at the laminating unit, to reduce static buildup and improve surface wettability and coating adhesion. The laminating unit enables protective film lamination as required by the process. The laminating unit enables protective film lamination as required by the process.

 

Applications

 

Suitable for applications in microelectronics, optoelectronics, semiconductors, and precision manufacturing.

Other materials, including hydrogels, silicone gels, and pressure-sensitive adhesives (PSAs), may also be evaluated where the coating and curing requirements are compatible with the machine configuration.

 

Frequently Asked Questions (FAQ)

 

1. Can the machine accommodate different UV photoresist formulations?

The machine requires customization to accommodate different UV photoresist formulations. The equipment configuration should be determined based on the specific material properties and process requirements.

2. How does the dual-unwinding configuration accommodate different substrates?

Unwinding Unit 1 is designed for delicate, low-strength substrates that are prone to breakage and require low web tension. Unwinding Unit 2 is suitable for most conventional substrates and is equipped with a corona treatment unit to improve surface wettability and coating adhesion, including on substrates with challenging release properties.

3. Can the UV curing system be customized for different photoresists?

Yes. The UV curing system can be customized based on the specific formulation and curing requirements of the customer's coating material.

4. What information is required to evaluate coating thickness and curing performance?

To evaluate coating thickness and curing performance, we require information about the slurry viscosity, solids content, and the required curing temperature and time. Additional material and process details may be requested depending on the application.

 

 

Products Detail images

uv1

product-831-291

product-726-541

 

Hot Tags: Laboratory Roll-to-Roll UV Photoresist Coating Machine - Innate, China Laboratory Roll-to-Roll UV Photoresist Coating Machine - Innate manufacturers, factory, Battery Coating Machine, Coater for Polymer Flame Retardant Sealing Material, Lithium battery coating machine, Microbial Test Strip coater, Single Station Coater, sheet coater

Send Inquiry
Send Inquiry