Waterproofing Membrane Coating Machine

Waterproofing Membrane Coating Machine

Waterproof material coating machine for laboratory trials and small-batch production. Features comma blade coating, uniform drying, and integrated web handling for compatible waterproofing materials.
Send Inquiry
Description

Products Introduction

 

The Waterproofing Membrane Coating Machine is designed for laboratory trials, coating process development, and small-batch production of waterproofing membranes.

 

It features a comma blade coating head, a two-section drying oven, and an integrated roll-to-roll handling system. The drying system is designed to promote more uniform heating, while the integrated tension control and web guiding help maintain stable substrate transport.

 

The machine is suitable for compatible coating slurries with viscosities of 5,000–15,000 cP (mPa·s). Bituminous materials can also be evaluated, depending on their formulation and processing requirements.

 

 

 Parameters

 

Parameter

Specification

Coating Method

Comma Blade Coating

Suitable Slurry Viscosity

5,000–15,000 cP (mPa·s)

Power Supply

Three-phase AC 380 V ±10%, 50 Hz

Total Installed Power

40 kW

Compressed Air Pressure

0.5–0.8 MPa

Guide Roller Width

450 mm

Effective Coating Width

0–350 mm

Maximum Mechanical Speed

20 m/min

Maximum Coating Speed

18 m/min

Coating Thickness Tolerance

±0.005 mm (±5 μm)

Temperature Setting Range

0–200°C

Drying Oven

2 sections × 2 m

Overall Dimensions

Approx. 4500 × 1300 × 2000 mm (L × W × H)

Machine Weight

Approx. 3800 kg

 

Main Machine Configuration 

The machine consists of:

Unwinding mechanism

Comma blade coating head

Corona treatment unit

Joining table

Front safety door

Two-section drying oven

Two tension control groups

Two traction systems

Two web-guiding systems

Rear safety door

Internal lighting and cleaning brush

Rewinding mechanism with meter counter

The integrated configuration supports continuous substrate transport from unwinding through coating and drying to rewinding.

 

Product Details 

 

Coating System

The comma blade coating head applies compatible waterproofing slurry to flexible substrates. Coating settings should be selected according to slurry viscosity, substrate properties, target thickness, and line speed.

Drying System

The two-section oven provides a total nominal drying length of 4 m, with a temperature setting range of 0–200°C. Its heating structure is designed to promote more uniform drying. The appropriate temperature profile and line speed depend on the material formulation, coating thickness, and substrate temperature resistance.

Web Handling and Corona Treatment

The corona unit helps improve substrate wettability where surface treatment is required. The tension control, traction, and web-guiding systems help maintain web alignment and stable transport during processing.

Control and Roll Management

The centralized control system supports machine operation, production monitoring, fault-time recording, and storage of up to 10 slurry recipes. A coating-material remaining-level alarm is set at approximately 20%.

The rewinding meter counter supports preset-length alarms and speed reduction. A low-roll alarm on the unwinding side reminds operators to prepare for material replacement. The machine does not imply automatic roll changing or automatic splicing.

For safety, the heating system automatically switches off when the machine stops due to a fault. Blade heating is also provided.

 

Applications 

The machine can be evaluated for the following applications, subject to material compatibility and process trials:

Building Waterproofing: Coating compatible waterproofing compounds onto suitable flexible substrates.

Waterproofing Membranes: Laboratory development and small-batch coating of membrane materials.

Bituminous Waterproofing Materials: Processing trials for compatible bituminous formulations, subject to viscosity and temperature requirements.

Industrial Anti-Seepage Materials: Coating compatible barrier materials for industrial applications.

Coating Process Development: Formulation evaluation and parameter optimization before larger-scale production.

 

Material Compatibility and Customization

The standard configuration is intended for compatible slurries with viscosities of 5,000–15,000 cP. Viscosity alone does not determine suitability; formulation, processing temperature, substrate, coating thickness, and drying requirements must also be considered.

 

For a preliminary equipment assessment, please provide:

Coating material and formulation type

Viscosity and measurement temperature

Substrate material, width, and thickness

Target wet or dry coating thickness

Required drying temperature and time, if known

Target coating speed and production output

Key finished-product requirements, such as adhesion, flexibility, or water resistance

 

These details help determine whether the standard configuration meets your process requirements.

 

Products Detail image

 

1

 

4

 

5

Hot Tags: Waterproofing Membrane Coating Machine, China Waterproofing Membrane Coating Machine manufacturers, factory, Flat Coating Machine, lab Roll to Roll Coater, laboratory coater, Laboratory Coating Machine, Multi Functional Coating Machine, Roll To Roll Coater

Send Inquiry
Send Inquiry