Optical Film Coating Machine with Comma Blade and Micro Gravure

Optical Film Coating Machine with Comma Blade and Micro Gravure

Precision optical film coating machine with comma blade and micro gravure coating heads, a 6 m hot-air drying oven, and temperature and humidity control for functional film applications.
Send Inquiry
Description

Products Introduction

The Comma Blade and Micro Gravure Coating Machine is designed for precision coating of optical films and other functional film substrates. Equipped with two coating heads-a comma blade coating head and a micro gravure coating head-the machine accommodates different coating formulations and viscosity ranges.

 

The 6-meter hot-air drying oven consists of three independently assembled 2-meter sections, providing a controlled drying environment to support consistent coating results. A temperature- and humidity-controlled enclosure helps maintain stable environmental conditions during coating, which is important for materials sensitive to temperature and humidity variations.

 

The machine also features web guiding, a lamination unit, water-cooled traction rollers at the discharge end, and reserved space for optional UV lamp installation. Its modular coating head and oven design simplifies assembly, relocation, and configuration for different process requirements.

 

 

Parameters

Parameter

Specification

Power Supply

Three-phase AC 380 V ±10%, 50 Hz

Total Power

40 kW

Compressed Air

0.5–0.8 MPa

Coating Methods

Comma Blade + Micro Gravure

Guide Roller Width

800 mm

Coating Width

0–700 mm

Maximum Mechanical Speed

18 m/min

Maximum Coating Speed

15 m/min

Coating Precision

0.005 mm (5 μm)

Drying Temperature Range

0–200°C

Drying Oven Length

6 m (3 × 2 m sections)

Machine Dimensions

L 10,000 × W 3,400 × H 2,300 mm

Machine Weight

Approximately 6,000 kg

 

 

Main Machine Configurations 

 

  • The machine consists of the following main units:
  • One comma blade coating head
  • One micro gravure coating head
  • Three oven sections, each 2 m long
  • One temperature- and humidity-controlled enclosure
  • Reserved installation space for a UV lamp system
  • Water-cooled traction rollers at the discharge end
  • One lamination unit
  • One web guiding system

 

Products Details 

  • Dual Coating Methods: Comma blade and micro gravure coating heads accommodate different coating formulations and process requirements.
  • 6 m Hot-Air Drying Oven: Three 2-meter oven sections support controlled drying and help improve drying consistency.
  • Temperature and Humidity Control: Helps maintain a stable coating environment for temperature- and humidity-sensitive optical films.
  • Integrated Web Guiding: Supports stable web transport and helps reduce lateral web deviation.
  • Water-Cooled Traction Rollers: Helps control roller temperature at the machine discharge end.
  • Lamination Unit: Supports film lamination according to the required process configuration.
  • UV Integration Ready: Reserved installation space allows for future integration of a UV curing system.
  • Modular Design: The coating heads and oven sections are designed as modules for easier assembly, relocation, and maintenance.

 

Applications

 

Typical application areas include:

  • Optical Films: Functional coatings for optical film substrates used in display and optical component manufacturing.
  • Display and Electronics Films: Precision coating of compatible functional films used in display components and electronic products.
  • Protective Films: Coating of protective films with compatible resin, adhesive, or functional formulations.
  • Release Films and Release Liners: Application of release coatings and other compatible functional coatings.
  • Functional Polymer Films: Precision coating of PET, PI, and other compatible polymer film substrates.
  • Adhesive Films and Tape Materials: Coating of compatible pressure-sensitive adhesive and functional adhesive formulations.
  • UV-Curable Functional Coatings: Potential applications involving UV-curable materials, subject to the installation of a suitable UV curing system and verification of process compatibility.

 

Customization

The appropriate coating method and drying conditions depend on coating viscosity, wet film thickness, substrate properties, and curing or drying requirements.

  • To evaluate your application, please provide:
  • Substrate material, thickness, and width
  • Coating formulation and viscosity
  • Required wet and dry coating thickness
  • Required coating speed
  • Drying temperature and residence time
  • Whether UV curing or film lamination is required

Our engineering team can assess the suitable coating head, oven configuration, and web handling arrangement for your process.

 

 

 Process Suitability 

The appropriate coating method-comma blade or micro gravure-depends on coating viscosity, target coating thickness, surface requirements, and material characteristics. Drying temperature, airflow, and residence time should be selected according to the coating formulation and substrate properties.

 

For applications involving optical performance, surface defects, or strict thickness tolerances, coating trials using the actual substrate and formulation are recommended before finalizing the machine configuration.

 

3D  Images

CAD

product-656-781

 

Hot Tags: Optical Film Coating Machine with Comma Blade and Micro Gravure, China Optical Film Coating Machine with Comma Blade and Micro Gravure manufacturers, factory, Comma Coating Machine, Micro Gravure Coater, Microbial Test Strip coater, Slope Flow Coating Machine, Transparent Film Coater, UV coating unit

Send Inquiry
Send Inquiry